Date: 29th Jul, 2017
Domestic waste plastic recycling extruder machine gradually into the automated production mode
The end of the manual era of plastic particles to enhance the level of automation. At present, China’s rapid development of plastic recycling extruder machine market, there are many new models introduced by the industry’s technology, R & D personnel to work together, some of the major special models such as exhaust particle machine, tandem mill screw machine, reciprocating Pellet Screw Particle Machine, Foam Granule Machine, Particle Machine with Melt Gear Pump, Tandem Multistage plastic recycling extruder machine, Planetary Screw plastic recycling extruder machine and so on are all domestic manufacturers, have the ability of independent research and development, and enjoy the independent intellectual property rights The
In the plastic extrusion molding equipment, plastic recycling extruder machine is usually called the host, and its supporting follow-up equipment, plastic extrusion machine is called auxiliary. plastic recycling extruder machine after 100 years of development, has been derived from the original single screw twin screw, multi-screw, and even no screw and other models.
With the upgrading of technology, plastic plastic recycling extruder machine and other equipment has long been the end of the manual feeding of the times, people can be heavy physical labor and dust flying in the environment freed, the original work done by the manual now by the transport equipment automatically The plastics industry has made great contributions.
In recent years, people have carried out a lot of theoretical and experimental research on the screw, has been nearly 100 kinds of screw, common separation, shear type, barrier type, shunt type and wave type. From the development of single screw, although in recent years, single screw particles machine has been more perfect, but with the continuous development of polymer materials and plastic products, but also the emergence of more features of the new screw and special single screw machine.
In all chemical manufacturing, plastic recycling extruder machine can be used with pipe, film, holding materials, monofilament, flat wire, packing belt, squeeze network, sheet, profile, granulation, cable coating and other plastic molding auxiliary Matching, forming a variety of plastic extrusion molding production lines, the production of various plastic products.
The series of conical twin-screw plastic recycling extruder machine has the characteristics of forced extrusion, high quality, wide adaptability, long life, small cutting rate, easy decomposition of materials, good mixing and plasticizing performance, direct molding of powder, temperature control, vacuum Exhaust and other devices. Applicable to the production of tubes, plates and profiled products.
Plastic particles according to the number of their screws can be divided into single screw, twin screw and multi-screw particles machine. At present, the single screw particle machine is the most widely used, suitable for the extrusion of general materials. Because of the less calorie produced by friction, the shear capacity of the material is relatively uniform, the conveying capacity of the screw is larger, the extrusion amount is relatively stable, the material is long in the barrel and mixed evenly.
Single-screw plastic recycling extruder machine as a plasticizing machinery or forming processing machinery have an important position in recent years, single-screw plastic recycling extruder machine has a great development. At present, the German production of large-scale plastic recycling extruder machine with a single screw pellet machine, screw diameter of 700mm, the output of 36t / h.